Online Support Centre

Getting started D-Link DSL-200 USB

1. Unpack the modem from the box.

2. Make sure you have all the items:

1x - D-Link DSL-200 modem (USB interface).
1x - Microfilter. Additional microfilters can be purchased when subscribing to Broadband or by contacting Customer Services.
1x - USB connection cable.
1x - RJ11 telephone connection cable.
1x - CD-ROM (includes driver and user's guide)
1x - Quick installation guide.

4. Plug one end (any end) of the RJ-11 telephone cable into the microfilter - the one shown on the right in the picture.

6. Locate a spare USB port on your computer and plug the rectangular end (the one shown on the left in the picture) of the USB cable into it.

8. To install the drivers see this document: Installing The D-Link DSL-200 USB Modem (New Model) On Windows 98.

7. After you have installed the drivers, plug the other, square end of the USB cable into the socket on the back of the USB modem labelled USB.
The software will prompt you to plug in the cable.

3. Unplug your telephone from the BT socket and the plug in a microfilter. If there is no telephone you will still require a microfilter. Now plug the telephone into the other end of the microfilter. Make sure that you have added a microfilter to ALL telephone sockets with a device plugged in. Other than the socket connecting to the modem all other sockets without a device plugged in do not require a microfilter.

Note: Filtering a line twice will result in you not being able to connect. If you have an extension cable place a microfilter at just one point of that cable.

5. Plug the other end of the RJ-11 telephone cable into the socket on the back of the USB modem labelled ADSL.


Has this page helped you solve your problem? Your feedback helps us to improve the help we provide.

Rate this page : happy neutral unhappy

Please note: We cannot reply to individual feedback through Rate My Page. If you need more help with a problem please use Contact Us.

D-Link DSL-200 USB Modem - Reinstallation

Broadband settings

Backup dial-in connection

Service Status RSS icon

Broadband OK
Email OK
Webspace & FTP OK
Newsgroups OK
Support services OK
My Account OK
  • Informational : General Information
  • Maintenance : Planned Maintenance

Customer Care: 0844 395 0830 or 0345 140 0200 (7 days a week, 365 days a year)
Technical Support: 0844 395 0830 or 0345 140 0200 (7 days a week, 365 days a year)
Calls to our 0844 support number cost 6p per minute plus your phone company's access charge.
Copyright ©Madasafish